Is The Window Place USA an authorized vendor for government window film procurement?

Yes. The Window Place USA is a SAM.gov-registered vendor (CAGE Code: 52MH9, DUNS: 807327700) and an authorized distributor of Saint-Gobain SolarGard architectural window films. We accept GSA SmartPay and P-Cards for federal and municipal procurement of ASTM F1642-compliant Armorcoat blast mitigation films and solar control films.

Which window film is recommended for school safety and delayed intrusion?

For school safety applications, we recommend SolarGard Armorcoat Safety and Security Window Film in 8-Mil or 14-Mil thicknesses. These films are tested to delay forced entry, buying critical time for law enforcement response, and hold shattered glass together to minimize injury during impact events. Both the 8-Mil and 14-Mil products are certified to ASTM F1642 blast mitigation standards.

Does SolarGard Ecolux 70 Low-E qualify for the Federal Energy Tax Credit?

SolarGard Ecolux 70 Low-E window film may qualify for the 30% Federal Energy Efficiency Tax Credit (Section 25C, IRS Form 5695) under the Inflation Reduction Act for qualifying residential installations through December 31, 2032, subject to an annual cap of $1,200. Consult your tax advisor to confirm eligibility for your specific installation.

Does The Window Place USA ship window film to all 50 states?

Yes. The Window Place USA ships factory-sealed SolarGard master rolls via FedEx Ground and Freight to all 50 states. Orders placed before 2:00 PM EST are eligible for same-day dispatch. We do not offer overnight or expedited shipping options.

Window Film Roll Calculator

Ready to Purchase?

Order the exact amount you need — browse all window film products

Shop Window Films →

⚠ NOTICE: Authorized 2026 Distribution Model — Factory-Sealed 100' Master Rolls Only. No Cuts. No Returns.

Authorized 2026 Solar Gard® Government & Commercial Procurement Rates

2026 Master Roll Requirement Calculator

Enter project dimensions below to calculate full rolls required and generate an official procurement quote.

How to Use the 2026 Master Roll Requirement Calculator

Step 1 — Measure

Enter the width and height of a single window in inches, then enter the total number of identical windows. For mixed sizes, run a separate calculation per window type.

Step 2 — Select Film

Choose your 2026 film type from the dropdown. Retail prices are pre-loaded at the authorized . The calculator automatically applies a 10% waste factor for professional cuts and edge trim.

Step 3 — Quote

Review your roll count and total investment. Click "Email Official Quote" to receive a PDF procurement breakdown at your email. A copy is routed to our fulfillment team for same-day processing.

Why Full Rolls Only?

Solar Gard® films are manufactured under ISO 9001:2015 controls at Saint-Gobain's production facility. Once a roll is opened or cut, the exposed adhesive edge is immediately susceptible to dust, moisture, and shop-floor contaminants — invalidating the manufacturer's warranty and security certifications. Factory-sealed 100' master rolls are the standard for government procurement, certified installers, and commercial glazing contractors. A 60" × 100' roll covers 500 square feet.

Window Width (inches)

Window Height (inches)

Number of Windows

Film Type — 2026 Retail Price Per 100' Master Roll (Authorized 2026 Rate)

FACTORY SEALED FULL ROLLS ONLY. NO CUTS. NO RETURNS.
Lead Time: 3–5 Business Days via FedEx | Tax Nexus: AZ, CA, FL, GA, HI, TX | 99% UV Rejection — All 2026 Solar Gard® Films

Ready to Purchase?

Order the exact amount you need — browse all window film products

Shop Window Films →