Is The Window Place USA an authorized vendor for government window film procurement?

Yes. The Window Place USA is a SAM.gov-registered vendor (CAGE Code: 52MH9, DUNS: 807327700) and an authorized distributor of Saint-Gobain SolarGard architectural window films. We accept GSA SmartPay and P-Cards for federal and municipal procurement of ASTM F1642-compliant Armorcoat blast mitigation films and solar control films.

Which window film is recommended for school safety and delayed intrusion?

For school safety applications, we recommend SolarGard Armorcoat Safety and Security Window Film in 8-Mil or 14-Mil thicknesses. These films are tested to delay forced entry, buying critical time for law enforcement response, and hold shattered glass together to minimize injury during impact events. Both the 8-Mil and 14-Mil products are certified to ASTM F1642 blast mitigation standards.

Does SolarGard Ecolux 70 Low-E qualify for the Federal Energy Tax Credit?

SolarGard Ecolux 70 Low-E window film may qualify for the 30% Federal Energy Efficiency Tax Credit (Section 25C, IRS Form 5695) under the Inflation Reduction Act for qualifying residential installations through December 31, 2032, subject to an annual cap of $1,200. Consult your tax advisor to confirm eligibility for your specific installation.

Does The Window Place USA ship window film to all 50 states?

Yes. The Window Place USA ships factory-sealed SolarGard master rolls via FedEx Ground and Freight to all 50 states. Orders placed before 2:00 PM EST are eligible for same-day dispatch. We do not offer overnight or expedited shipping options.

Clear Safety Window Film

Solar Gard Armorcoat Blast Mitigation Safety Window Film — Federal Building GSA Compliant

Armorcoat® Blast Mitigation Safety Film — GSA Level C/D · ASTM F1642 · Holds Glass In-Frame During Blast Events

SolarGard® Armorcoat® Clear Safety Window Film

Invisible protection — safety without sacrificing clarity.

SolarGard Armorcoat Clear Safety films provide a virtually invisible layer of protection that holds glass fragments together in the event of impact, explosion, or attempted forced entry. Available in 4-Mil and 8-Mil thicknesses.

Available Products

Product	Thickness	Protection Level	36" x 100ft Price
Armorcoat 4-Mil Clear	100 microns	Standard Safety	$1,039.50
Armorcoat 8-Mil Clear	200 microns	High Level (ASTM F1642)	$1,386.00

Key Benefits

Technical Specifications
Optically clear — no tint, no reflectance change
Holds glass fragments together on impact
Delays forced entry — buys critical response time
Blocks >99% of UV radiation
ASTM F1642 blast mitigation certified (8	Mil)
ASTM F1642 / ANSI Z97.1 compliant (8	Mil)

All Safety Films Armorcoat 8-Mil Details

Contact inquiries@thewindowplaceusa.com. Same-day dispatch for 100ft master rolls via FedEx Ground/Freight if ordered by 3:00 PM.

☀

99% UV Rejection

300–380nm Spectrum

🏭

Factory-Sealed Roll

100% Adhesive Integrity

🌏

Saint-Gobain

Authorized Distributor

Authorized 2026 Solar Gard® Procurement Pricing

Armorcoat® Security Film — Full 100' Master Rolls Only (Authorized 2026 Rate)

SKU / Description	Roll Size	2026 Unit Price	Notes
4 Mil Clear Security — Armorcoat®	60" × 100'	$1,638.00	99% UV
8 Mil Clear Security — Armorcoat®	72" × 100'	$2,709.00	99% UV
14 Mil Clear — Armorcoat® (Certified)	72" × 100'	$4,435.20	Certified Partner Only

⚠ WARRANTY NOTICE: 10 Mil and 14 Mil Armorcoat® films require installation by an Armorcoat® Certified Partner to maintain manufacturer warranty.

FULL 100' FACTORY-SEALED MASTER ROLLS ONLY. No 25ft or 50ft cuts. No returns.

Official Solar Gard® Blast Mitigation Test — GSA/DoD Standard

Demonstration: Filmed vs. unfilmed glass during simulated blast event. Armorcoat® security film holds glass fragments in place, preventing secondary injury from shrapnel.

Certified Partner verification required before procurement. Click to begin.

Armorcoat® School Safety & Blast Mitigation — Authorized 2026

GSA Compliant · ASTM F1642 · ANSI Z97.1 · 99% UV Rejection · Factory-Sealed Full Rolls

Armorcoat Blast Mitigation — Federal Facility Protection

GSA Level C & D ASTM F1642 Blast Resistance ANSI Z97.1 Safety Glazing Forced Entry Protection 99% UV Rejection ISO 16933 Rated

Solar Gard Armorcoat® Safety & Security Window Film adds a critical layer of facility protection by holding shattered glass in place during blast events, forced entry attempts, and severe weather. As the world's only manufacturer of both glass and window film, Saint-Gobain engineers Armorcoat® to work in concert with the glazing system — not against it.

Blast Mitigation

Holds glass fragments in the frame during explosive events. Reduces secondary injury from flying glass — the leading cause of blast casualties.

Forced Entry Delay

Multi-layer polyester construction dramatically increases the time required to breach a window — critical for active threat response protocols.

UV & Solar Control

All Armorcoat® films provide 99% UV rejection, reducing interior fading and protecting students and staff from UV exposure through glass.

Wet-Glaze Attachment

For maximum blast performance, 8–14 Mil films should be installed with a wet-glaze or mechanical attachment system anchoring film to the window frame.

2026 Security Film — Technical Specifications

Product	Thickness	Break Strength	GSA Rating	Unit Price
4 Mil Clear Security	100 micron	100 lbs/inch	Level 3B	$1,638.00
8 Mil Clear Security	200 micron	200 lbs/inch	Level C	$2,709.00
14 Mil Clear (Certified)	350 micron	350 lbs/inch	Level D (High)	$4,435.20