Is The Window Place USA an authorized vendor for government window film procurement?

Yes. The Window Place USA is a SAM.gov-registered vendor (CAGE Code: 52MH9, DUNS: 807327700) and an authorized distributor of Saint-Gobain SolarGard architectural window films. We accept GSA SmartPay and P-Cards for federal and municipal procurement of ASTM F1642-compliant Armorcoat blast mitigation films and solar control films.

Which window film is recommended for school safety and delayed intrusion?

For school safety applications, we recommend SolarGard Armorcoat Safety and Security Window Film in 8-Mil or 14-Mil thicknesses. These films are tested to delay forced entry, buying critical time for law enforcement response, and hold shattered glass together to minimize injury during impact events. Both the 8-Mil and 14-Mil products are certified to ASTM F1642 blast mitigation standards.

Does SolarGard Ecolux 70 Low-E qualify for the Federal Energy Tax Credit?

SolarGard Ecolux 70 Low-E window film may qualify for the 30% Federal Energy Efficiency Tax Credit (Section 25C, IRS Form 5695) under the Inflation Reduction Act for qualifying residential installations through December 31, 2032, subject to an annual cap of $1,200. Consult your tax advisor to confirm eligibility for your specific installation.

Does The Window Place USA ship window film to all 50 states?

Yes. The Window Place USA ships factory-sealed SolarGard master rolls via FedEx Ground and Freight to all 50 states. Orders placed before 2:00 PM EST are eligible for same-day dispatch. We do not offer overnight or expedited shipping options.

SolarGard® Armorcoat® 14-Mil Clear — Maximum Security Window Film

ASTM F1642 Maximum Level of Protection — EN 13541 ER1 Certified

Armorcoat 14-Mil is the highest protection level in the SolarGard safety film portfolio. Engineered for maximum-security government facilities, embassies, military installations, and high-threat environments. As an Authorized Distributor of SAM-Registered Distributor, The Window Place USA supplies Armorcoat 14-Mil for the most demanding federal applications.

Technical Specifications

Thickness	350 microns (14 mil)
Blast Standard	ASTM F1642 — Maximum Level of Protection
Explosion Standard	EN 13541 ER1 (Fraunhofer Institute certified)
Government Agency Standard	ASTM F1642 / ANSI Z97.1 compliant
Federal Facilities Standard PBS-P100	2024 Facilities Standards compliant
UV Blocked	>99%
Retail Price (36" x 100ft)	$3,580.50

Applications

Maximum Blast Mitigation — Embassies, military installations, federal buildings
School Safety — Maximum deterrent against forced entry
Critical Infrastructure — Power plants, data centers, financial institutions
DoD Facilities — Department of Defense approved applications

All Safety Films Government Agency Procurement

Contact inquiries@thewindowplaceusa.com for institutional pricing and Government Agency procurement assistance. Same-day dispatch for 100ft master rolls via FedEx Ground/Freight if ordered by 3:00 PM.

☀

99% UV Rejection

300–380nm Spectrum

🏭

Factory-Sealed Roll

100% Adhesive Integrity

🌏

Saint-Gobain

Authorized Distributor

Authorized 2026 Solar Gard® Procurement Pricing

Armorcoat® Security Film — Full 100' Master Rolls Only (Authorized 2026 Rate)

SKU / Description	Roll Size	2026 Unit Price	Notes
4 Mil Clear Security — Armorcoat®	60" × 100'	$1,638.00	99% UV
8 Mil Clear Security — Armorcoat®	72" × 100'	$2,709.00	99% UV
14 Mil Clear — Armorcoat® (Certified)	72" × 100'	$4,435.20	Certified Partner Only

⚠ WARRANTY NOTICE: 10 Mil and 14 Mil Armorcoat® films require installation by an Armorcoat® Certified Partner to maintain manufacturer warranty.

FULL 100' FACTORY-SEALED MASTER ROLLS ONLY. No 25ft or 50ft cuts. No returns.

Official Solar Gard® Blast Mitigation Test — GSA/DoD Standard

Demonstration: Filmed vs. unfilmed glass during simulated blast event. Armorcoat® security film holds glass fragments in place, preventing secondary injury from shrapnel.